At the top of the neck, you'll find a bone nut for good sustain, and white binding all around the fingerboard for a clean look and feel. Topping off the fretboard are custom pearloid inlays designed by PHRED instruments. The fretboard features a 15 inch radius which is perfect for soloing and playing chords up and down the fretboard. The 2-octave ebony fingerboard has 24 medium jumbo frets which are leveled and milled here at our shop in California for a nice smooth feel along the edge of the fretboard and all around. The back of the neck contour is a C-shape that feels somewhere in between a strat and an LP neck, not too thin, and not too chunky either. The maple core neck is attached to the body using very strong wood glue. We offer an optional custom hard shell case to go with the DockStar Koa guitar. There is one 1/4" standard guitar output jack on the side of the guitar body. The ebony tailpiece is attached to the end of the guitar, holding the strings in place. Similar to a violin, banjo or mandolin bridge, the bridge simply rests on top of the body and is held in place by string tension. The guitar strings pass over a floating bridge that is not anchored to the guitar body. The fully hollow body with koa veneers on the front and back features a dual humbucker setup, with discrete split coil switches and a 3-way pickup toggle for 8 different tone combinations! There is one master volume and one master tone knob for dialing in your tone. The fully hollow body features a dual humbucker setup, with discrete split coil switches and a 3-way pickup toggle for 8 different tone combinations! The PHRED instruments DockStar Koa gets its inspiration from Trey Anastasio's Languedoc guitar. Phred Dockstar Koa Semi-Hollow Electric Guitar w/Gig Bag - USED
0 kommentar(er)
